Any question, please email us for technical support and find best solution for you. We will reply within 24 hours.
1. ON/OFF indicator not light up. Please Check the power.
2. No image/Blue Screen with word 'No signal'.
a. Ensure the monitor is powered and turn on.
b.Check if connection between video input device and monitor is OK.
c.Select correct signal input mode by remote control or buttons on monitor. It should match signal connection type. For example, if you use HDMI cable to link video input device and monitor, then select 'HDMI'as input signal mode.
3. Remote does not work with display.
Please remove the battery saver, or try buttons on the monitor.
Display Area:8 Inch 4:3 LED HD Digtal Screen
Aspect Ratio: 16:9/4:3/Auto
VGA: Support 15 PIN VGA input connect with pc
Screen Brightness:400 cd/m2
Color System:PAL, NTSC,SECAM
Speaker:Built-in 2 speakers
View Angle: H: 160°; V: 160°
Response Time:Up to 12ms
Frequency:60 to 75Hz
Signal Input:USB,HDMI,AV, VGA, BNC
Image can flip up and down
Input AC 100~240V, 50~60Hz (worldwide voltage). Output: DC 12V, 2A
1*8 Inch TFT Monitor
1*DC12V/2A AC Adapter
1*Remote Control(use within 5 feet range)
8 inch IPS Monitor Display,Wide Viewing Angle 160 degrees High Resolution (1024x768) LED Backlight and Glossy Screen.
Multi Video Input(BNC,VGA, AV, HDMI,USB);Bulit-in Dual High-quality Dual Speakers
Support Single Video Input, High Sensitivity, Strong Anti-jamming.
Low Power Consumption,Use it for long time.
Suitable for CCTV Monitor,Vehicle Display,PC Display or Indoor Use.