Arduino GSM Shield 2 A000105 from Arduino

Price: $82.95
Product prices and availability are accurate as of 2017-06-24 08:19:04 CDT and are subject to change. Any price and availability information displayed on http://www.amazon.com/ at the time of purchase will apply to the purchase of this product.
Availability: Not Available - stock arriving soon
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Product Description

AJ Electronics are delighted to present the brilliant Arduino GSM Shield 2 A000105.

With so many available right now, it is great to have a name you can trust. The Arduino GSM Shield 2 A000105 is certainly that and will be a perfect acquisition.

For this price, the Arduino GSM Shield 2 A000105 is widely recommended and is a popular choice amongst many people. Arduino have provided some excellent touches and this results in great value.

Manufacturer Description

The Arduino GSM Shield allows an Arduino board to connect to the internet, make/receive voice calls and send/receive SMS messages. The shield uses a radio modem M10 by Quectel (datasheet). It is possible to communicate with the board using AT commands. The GSM library has a large number of methods for communication with the shield.

New version includes audio jack and new M10 firmware

The shield uses digital pins 2 and 3 for software serial communication with the M10. Pin 2 is connected to the M10's TX pin and pin 3 to its RX pin. See these notes for working with an Arduino Mega, Mega ADK, or Leonardo. The modem's PWRKEY pin is connected to Arduino pin 7.

The M10 is a Quad-band GSM/GPRS modem that works at frequencies GSM850MHz, GSM900MHz, DCS1800MHz and PCS1900MHz. It supports TCP/UDP and HTTP protocols through a GPRS connection. GPRS data downlink and uplink transfer speed maximum is 85.6 kbps. To interface with the cellular network, the board requires a SIM card provided by a network operator.

The most recent revision of the board uses the 1.0 pinout on rev 3 of the Arduino Uno board. Notes on the Telefonica/Bluevia SIM included with the shield

The GSM shield comes bundled with a SIM from Telefonica/Bluevia that will work well for developing machine to machine (M2M) applications. It is not necessary to use this specific card with the shield. You may use any SIM that works on a network in your area. The Bluevia SIM card includes a roaming plan. It can be used on any supported GSM network. There is coverage throughout the Americas and Europe for this SIM, check the Bluevia service availability page for specific countries that have supported networks. Activation of the SIM is handled by Bluevia. The SIM must be inserted into a powered GSM shield that is mounted on an Arduino for activation.

Arduino board not included.

Product Features

Quad band GSM Arduino GSM shield It is recommended that the board be powered with an external power supply that can provide between 700mA and 1000mA. Warnining: The GSM Shield works only on 2G network. Check that in your country there is an active 2G Network before to buy it.

Write a Review