Dual Shaft Nema 17 Stepper Motor 1.8deg 26ncm/37oz.in 12v 0.4a 42x42x34mm 4-wire from OSM Technology Co.,Ltd.

Price:
Product prices and availability are accurate as of 2017-09-02 18:10:08 CDT and are subject to change. Any price and availability information displayed on http://www.amazon.com/ at the time of purchase will apply to the purchase of this product.
Availability: Not Available - stock arriving soon
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Product Description

AJ Electronics are happy to present the fantastic Dual Shaft Nema 17 Stepper Motor 1.8deg 26ncm/37oz.in 12v 0.4a 42x42x34mm 4-wire.

With so many on offer today, it is good to have a make you can trust. The Dual Shaft Nema 17 Stepper Motor 1.8deg 26ncm/37oz.in 12v 0.4a 42x42x34mm 4-wire is certainly that and will be a great acquisition.

For this price, the Dual Shaft Nema 17 Stepper Motor 1.8deg 26ncm/37oz.in 12v 0.4a 42x42x34mm 4-wire comes widely recommended and is always a regular choice for many people. OSM Technology Co.,Ltd. have provided some great touches and this means great value for money.

Manufacturer Description

This is bipolar Nema 17 stepper motor with 1.8° step angle (200 steps/revolution). Each phase draws current 0.4A at 12V, allowing for a holding torque of 26Ncm(36.8oz.in). A rear shaft can mount encoder or equals.

Electrical Specification

* Manufacturer Part Number: 17HS13-0404D
* Motor Type: Bipolar Stepper
* Step Angle: 1.8°
* Holding Torque: 26Ncm(36.8oz.in)
* Rated Current/phase: 0.4A
* Phase Resistance: 30ohms
* Recommended Voltage: 12-24V
* Inductance : 37mH±20%(1KHz)

Physical Specification
* Frame Size: 42 x 42mm
* Body Length: 34mm
* Shaft Diameter: ?5mm
* Front Shaft Length: 20mm
* Rear Shaft Length : 10mm
* D-cut Length: 15mm
* Number of Leads: 4
* Lead Length: 400mm
* Weight : 230g

Connection:

Black(A+), Green(A-), Red(B+), Blue(B-)

Warning:

Make sure the motor connect to a constant current or chopper drive controller before you test motor.
Connecting the motor directly to a power supply will destroy the motor.

Product Features

Double Shaft NEMA-17 bipolar 34mm 4-wire 1.8° step angle(200 steps/rev) Rated current 0.4A & resistance 30ohms 26Ncm(36.8oz.in) holding torque

Write a Review