Phantomount X2 Carbon Fiber 2 Axis Gimbal for Dji Phantom from PhantoMount

Price: $135.00
Product prices and availability are accurate as of 2017-08-20 18:02:40 CDT and are subject to change. Any price and availability information displayed on http://www.amazon.com/ at the time of purchase will apply to the purchase of this product.
Availability: Not Available - stock arriving soon
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Product Description

We are happy to present the fantastic Phantomount X2 Carbon Fiber 2 Axis Gimbal for Dji Phantom.

With so many available recently, it is wise to have a brand you can trust. The Phantomount X2 Carbon Fiber 2 Axis Gimbal for Dji Phantom is certainly that and will be a excellent buy.

For this reduced price, the Phantomount X2 Carbon Fiber 2 Axis Gimbal for Dji Phantom comes highly respected and is always a popular choice with most people. PhantoMount have included some great touches and this means great value.

Manufacturer Description

Product Description: The PhantoMount X2 Phantom gimbal frame and mounting plate is made of 1.5mm carbon fiber. Designed to work on many platforms this gimbal utilizes two HiTec 5245MG Digital Ball Bearing servos (sold separately) directly mounted to both the pitch and roll axis of the camera. This reduces overall weight, moving parts and greatly simplifies the design of the gimbal. Purchase the carbon fiber PhantomFeet and Phantom Skids to raise your Phantom 1" off the ground allowing clearance between the bottom of this gimbal and ground. Utilizing the Gimbal Stabilization built into the DJI Naza-m flight controller you can directly power and control the gimbal. No additional expensive stabilization controller is needed. Installation onto your Phantom is easy too. Simply attach the gimbal with two screws included with the hardware and connect to your flight controller. Set up and tune the gimbal in the DJI Assistant Software and film where you fly! We recommend that you power your PhantoMount X2 gimbal servos through a 6v BEC harness. This will provide smoother reaction and cleaner videos. The X2 version of the PhantoMount gimbals is intended for aerial photography with the GoPro camera out of its case. For FPV flight or if you want to have your camera in its protective case then the PhantoMounts X2 Wide gimbal is more for you. **HERO 3 GO PRO CAMERA AND DJI PHANTOM NOT INCLUDED** Recommended: PhantomFeet PhantomSkids Required: Two Mini Servos (HiTec 5245MG)

Product Features

Made of 1.5mm carbon fiber Designed to work on many platforms this gimbal utilizes two HiTec 5245MG Digital Ball Bearing servos (sold separately) directly mounted to both the pitch and roll axis of the camera This reduces overall weight, moving parts and greatly simplifies the design of the gimbal Purchase the carbon fiber PhantomFeet and Phantom Skids to raise your Phantom 1" off the ground allowing clearance between the bottom of this gimbal and ground. Utilizing the Gimbal Stabilization built into the DJI Naza-m flight controller you can directly power and control the gimbal. No additional expensive stabilization controller is needed.

Write a Review