b>Tomsenn HDMI audio extractor
This device extracts the digital audio signal from the HDMI input and converts it to 2 channel analog stereo output or 5.1 channel Audio outputs.
To improve our customers experience, we posted the following three methods if you experience no sound from output
1. Switch EDID Button
Switch the EDID audio switch in the front. Change it between 2CH, 5CH or pass.
2. Turn Off Dolby Digital Plus
Because TOSLINK (SPDIF) does not support Dolby Digital Plus, you need to turn off Dolby Digital Plus function of the input devices. Then the sound can go through the extractor.
1.Video I/O: One HDMI Input, One HDMI output ,One VGA Output
2.Audio Extractor Outputs: One SPDIF/TOSLINK output, One Coaxial Audio Output;One 3.5mm stereo analog output,
3.Support HDMI v1.3b input resolution up to 1080P @ 60Hz, supports 3D (24/30fs)
4.Uses 24bit/96KHz audio DSP receiver and 24bit/192KHz DAC
5.Support all digital audio formats up to 96KHz, Dolby digital (AC3), DTS, 2CH LPCM
PASS: Switch to PASS mode for the HDMI source to output audio per the EDID of connected TV or AV receiver; supports Dolby TrueHD, DTS HD Master Audio and LPCM 7.1 channels.
2CH: Switch to 2CH mode for the HDMI source to output LPCM 2CH audio. HDMI, SPDIF, Coaxial and 3.5mm headphone will all have stereo audio.
5.1CH: Switch to 5.1CH mode for the HDMI source to output 5.1 DD or DTS audio. HDMI, SPDIF and Coaxial output 5.1CH audio, and the headphone out outputs FL and FR channel audio. it does NOT support Dolby Digital Plus and PCM 5.1CH and beyond
1. HDMI to Hdmi+VGA+5.1CH Converter
2. 5V DC Power adapter
3. User Manual
Extract the digital hdmi audio signal from the HDMI input and convert it to 2 channel analog stereo output or 5.1 channel Audio output
One HDMI Input to One HDMI Output, One SPDIF and Coaxial Audio Output and One RCA R/L Stereo Audio Output
Supports 12bit per channel (36bit all channel) deep color. Supports HDCP, Video EDID Pass Through; Plug & Play
Provides the Best Flexibility through Three NEW Audio EDID Settings: Pass, 2CH and 5.1CH, Support 3D video (To get 3D, all units connected to the splitter outputs must support 3D). This item supports Apple TV and various Blu-ray player and satellite receivers
Audio EDID Settings: 2CH for L/R or SPDIF stereo output; 5.1CH for SPDIF Output, it does NOT support Dolby Digital Plus and PCM 5.1CH and beyond